Lights attached to the facial skin of a wall are at risk of injury from water. Whether you executing periodic servicing or are installing a mild, caulking guarantees connections and the wiring in the wall are protected from shorts that are possible. When caulking outside lights at wood or masonry partitions, servicing specialists and electricians use related methods. The work isn’t difficult as well as in the majority of instances, the common do-it- yourself can achieve it in a fairly brief time.
Turn the circuit-breaker that services the outside light off. Check using a non-contact circuit tester by inserting the tester to the socket and by eliminating the bulb of the light fixture. The tester chirps when there’s a livewire or flashes.
Stand a step-ladder in the location of the mild. Unscrew and remove the flood bulbs or lamps in the fixture. Set these aside.
Loosen the screws that secure the fixture in place using a screwdriver. Hold the fixture and remove the screws. Pull the light fixture from the wall and hold it constant as you thread the screws back to the holes. This stops dropping the screws and makes them handy when itas time to re install the fixture.
Unscrew the wire nuts in the wiring connections yourself. Set the nuts apart. Untwist all the wires that are light in the circuit wires and set the fixture apart. With outside lights, the red, black and white wires hook up to related wires in the wall.
Fit a tube of exterior caulking in a tube. Cut the tip of the tube using a utility knife to make a 1/4 inch opening. Apply a bead of caulking on the rim in the rear of the fixture. Set the gun apart.
Reattach the wires in the light to the wires in the circuit using the wire that is saved nuts. Tighten the nuts yourself.
Remove the screws in the mounting holes. Align the fixture and press the rim on the surface of the wall. Thread and hold it in place the screws throughout the surface of the fixture and in the holes. Tighten the screws together with the screwdriver.
Reinstall bulbs or the flood lamps to the fixture. Turn on the breaker.