Reglazing a bathtub eliminates chips, scratches and stains, and is an inexpensive means to rejuvenate an old fixture. When done, a bathtub can look just like brand new and with appropriate care, it can last for years. Just how long that the new finish continues depends on who implemented the materials that he used, the finish, and how you clean and take care of the bathtub.
Reglazing a bathtub requires stripping off the glaze first. Professionals typically use acid to do this, and they rinse and sand the bathtub. When the finish is gone, the technician cleans the bathtub to remove dirt, dust and other materials, and fills holes or cracks in the bathtub. Subsequently the bathtub is ready to be glazed. Professional refinishers use 2 coats of epoxy to ensure the finish coat adheres and finish the procedure. They typically spray to get a smooth result on these finishes, then polish the bathtub to a high shine.
Professional vs. DIY
To reglaze a bathtub, acrylic, polyurethane or urethane products, while kits consist of paints or epoxies are normally used by professionals. They are also not as durable and the finish deteriorates rapidly, although these are not as toxic as materials. Many DIY kits begin peeling within the first year, while specialist bathtub reglazing lasts longer.
The Most Important Thing
How long a glaze will continue on your bathtub depends on factors like if you did yourself or hired a specialist, and you maintained and cleaned the finish. Bathtub refinishers usually offer guarantees that normally vary between five and three decades. With appropriate maintenance and cleaning, the fresh finish of your bathtub can last this long or longer. According to president of Surface Doctor, Chuck Pistor, the conclusion on a tub will last 10 to 15 years if you take care of it. But be wary of companies offering a lifetime warranty when they’ve just been in business a couple of decades, or companies that offer warranties that are longer than the company itself has been in business.
Prolonging the End
It is going to require appropriate care to prevent discoloration, chips and scratches if you have had your bathtub reglazed. Never use bleach, steel wool or abrasive cleaners on a bathtub . After cleaning, use nonabrasive, kitchen cleaners that are bleach-free instead. The coating can tear so avoid these and use a urethane polish about every six months to extend the life span of the coating.